Description

Altronix – EFLOW104N – Power Supply Charger with Single Output

Ideal for a multitude of purposes, including CCTV, Fire Alarm and POIP. A leading global provider of power and transmission technologies for professional security system applications, Altronix develops innovative solutions that integrate disparate infrastructure and maximize overall performance and efficiency.
Altronix Power Supplies are ideal for a multitude of purposes, including:

• General Use
• CCTV
• Fire Alarm
• POIP

• Input:

  • 120VAC, 60Hz, 4.5A.
  • Input fuse: 5A 250V.

  • Output:

    • 24VDC @ 10.0A supply current.
    • Auxiliary Power-Limited output rated @ 1A (unswitched).
    • Over Voltage Protection.

    • Battery Backup:

      • Built-in charger for sealed lead acid or gel type batteries.
      • Automatic switch over to stand-by battery when AC fails. Transfer to stand-by battery power is instantaneous with no interruption.

      • Fire Alarm Disconnect:

        • Supervised Fire Alarm disconnect (latching or non-latching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger.

        • Supervision:

          • AC fail supervision (form C contacts).
          • Notification trigger is selectable for 30 seconds (factory set) or 2 hours.
          • Battery fail and presence supervision (form C contacts).
          • Low power shutdown. Shuts down DC output terminals if battery voltage drops below 80% of nominal. Prevents deep battery discharge.

          • Visual Indicators:

            • Green AC Power LED indicates 120VAC present.
            • AC input and DC output LED indicators.

            • Additional Features:

              • Short circuit and overload protection.
              • Unit is complete with power supply, enclosure, battery leads and cam lock.

              • Temperature:

                • Operating 0ºC to 49ºC (32ºF to 120ºF).
                • Storage – 20ºC to 70ºC ( – 4ºF to 158ºF).
                • Relative Humidity 85% + – 5%.
                • BTU Hr. (approx.): 123 BTU Hr.
                • System AC input VA requirement: 540VA.

                • Enclosure:

                  • Wall mount enclosure for indoor use.
                  • Accommodates up to two (2) 12VDC 7AH Batteries.
                  • Dimensions 13 W x 13.5 H x 3.25 D (330 mm W x 343 mm H x 83 mm D).
                  • 1.125 and 1.375 combination knockouts.

                  • Download:

                    • Installation Instruction