Functions:

• Generate Remote and Smart key
• Program and Immo Transponder
• Generate Special Transponder
• Renew Remote
• Recognize and Copy Access card
• Generate and Copy Garage Remote
• Frequency Detection and Copy remote
• Connect to Xhorse Key Cutting Machine
• Generate transponder,Transponder Clone, Generate Remote,Remote Clone, OBD matching transponder remote smart card.

• The port which is used to connect the programmer is reserved. After the expansion, the chip can be written start data, and the operation of the IC reading data is equivalent to the function of the tango.

  KEY TOOL MAX can be connected with Condor Dolphin XP-005 key machine via Bluetooth, to be used like operating screen of Dolphin XP-005.

  Ways for Connect to Mani OBD Tool

  1. USB TYPE – C Cable
  3. WIFI
  5. Bluetooth

  6. Click on the [Select] on the HOME page. Available device will be shown on the screen. Choose device to connect according to Serial Number.

     Software will detect current device with software interface connection status、WLAN connection status and WIFI connection status.

     How to Update VVDI Key Tool Max & Mini OBD Tool Firmware:

     • VVDI Max no need connect with computer with Xhorse update kit software to update firmware, just connect VVDI Max with internet to update firmware is OK, easier to update.
     • VVDI MINI OBD Tool Update:
     • • MINI OBD Tool connect with computer, use Xhorse update kit software to update firmware.
       • Or connect mini OBD tool with VVDI max to update firmware.

       • Connect WIFI ensure internet is good.
         Update need around 10 minutes,ensure device with enough power at least remain more than 20%.
         Don t press Power button while update.

         Xhorse VVDI MINI OBD Tool With Diagnosis, Programming, IMMO Function

         Xhorse VVDI MINI OBD Tool is designed to be used together with Key Tool Max for immobilizer programming and diagnostic functions.

         MINI OBD TOOL is a multi-function vehicle programming tool with vehicle diagnosis, Immo Programming, Throttle program, Tire pressure light reset, maintenance light reset and etc.
         MINI OBD TOOL can connect with specific software or hardware by WIFI, WLAN or interface.

         Main Functions:

         • Immo Programming
         • Vehicle Diagnosis
         • Tire Pressure Light reset
         • Throttle Program
         • Maintenance Light Reset
         • Battery Programming
         • Steering Angle Calibration
         • EABS Programming
         • KM Correction
         • Key Code Learning
         • Remote Manual Programming.
         • Part #: XDMO00EN

         • Download:

           • User Manual

           • Xhorse 8A Control Box Cable Non-Smart Key Adapter for All Keys Lost for Toyota

             • Can be used without disassembling the immobilizer box.
             • Supports VVDI2 Key Tool MAX + MINI OBD Tool.
             • Register with phone # and get online service.
             • Toyota 8A Non-Smart Key Car Models: Levin, Corolla, RAV4, Pardo, Land Cruiser, Camry, Highlander, Reiz (Mark X), Sienna.
             • Part #: XD8ANKEN